How To Root Samsung Galaxy Tab 2 10.1 P5100 With Android 4.1.2 ( Official Firmware )


At this page, we will share guides How To Root Samsung Galaxy Tab 2 10.1 P5100 With Android 4.1.2. In this tutorial we use UBDMD1 Android 4.1.2 ( Official Firmware ). For make this method easily, we use CF-Root Auto, so all of Samsung Galaxy Tab 2 10.1 P5100 user can try this. You can read all step carefully and try that.

Before you start all step on this page, remember to dont use this method on any other variant, we just use at Samsung Galaxy Tab 2 10.1 P5100. All risk all belong to you. Backups are importants, so dont forget to make your phone backup. If you get something bad, you can easily back to your worked phone with that backup. We use CF-Root Auto, for UBDMD1 Android 4.1.2, so your Samsung Galaxy Tab 2 10.1 P5100 must installed with this official firmware before. Your phone will be installed with this official firmware, not custom rom. If you done read all, you can do all complete steps below.

Let’s Begin !

Samsung Galaxy Tab 2 10.1 P5100

How To Root Samsung Galaxy Tab 2 10.1 P5100 Using CF-Root Auto :

  1. Download Root Package – CF-Root for Samsung Galaxy Tab 2 10.1 to your computer and extract the zip file.
  2. Download ODIN
  3. Switch OFF your tablet. Now go to Download Mode. How? Press and hold the Volume Up button and then press the Power button together till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
  4. Make sure you have your Samsung Galaxy Tab 2 10.1 USB drivers installed on your computer.
  5. Open ODIN on your computer. Connect your tablet to your computer while your tablet is in the Download Mode.
  6. If your tablet is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
  7.  Now select the file that you have to flash/install on your tablet. This file will be found from the extracted file in Step 1.
    • Click on ‘PDA’ and select the file ‘‘.
  8. In ODIN, check the Auto Reboot and F. Reset Time options, if not already.
  9. Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
  10. After the installation is completed, your tablet will reboot into Recovery Mode automatically and install the root package / files. Your ID:COM box will also turn green.
  11. After you see the home screen, unplug your tablet from the computer.
  12. Congrats! Your Samsung Galaxy Tab 2 10.1 has now been rooted on UBDMD1 Android 4.1.2 official software update. Check for the SuperSU app in your apps list to verify.


OPTIONAL: Still not rooted? Once again perform the entire tutorial, but make sure in ODIN, the “Auto Reboot” option is NOT checked. Then after installation (Step 10), do the following:

11.Pull out the battery (or keep holding the Power button) to turn OFF the tablet forcefully.

12. Now boot (turn ON your tablet) with Volume Down + Power buttons to go directly into Recovery Mode manually. This will start the install process of rooting your phone.

Disclaimer: It’s always a risk to modify your device. We are not responsible for any damage or bricks on your device. Your device warranty may void with any mod. Check your devices warranty’s term & conditions before start.  Use this guide on your own risk.

Posted in Tutorials. Tagged with , , , , , .

Leave a Reply