How To Install DXAME1 Android 4.1.2 Jelly Bean Official Stock Firmware To Galaxy S Advance I9070P


Galaxy S Advance I9070P

Theres good news for Galaxy S Advance I9070P users, you can install DXAME1 Android 4.1.2 firmware to Galaxy S Advance I9070P. This firmware update was released earlier this month and can be downloaded from Samsung KIES, or a manual installation would be fine as well by following our tutorial given below. DXAME1 Android 4.1.2 official firmware is the latest Jelly Bean update for this phone and is a must-install update for those who are still on the old Android 2.3 Gingerbread. You can install DXAME1 Android 4.1.2 on Galaxy S Advance I9070P NFC from the tutorial below. You do not need to have ClockworkMod custom recovery installed for this tutorial.

As you read further, we will guide you through the entire process of how to update Galaxy S Advance I9070P NFC to DXAME1 Android 4.1.2 Jelly Bean official firmware using ODIN. Please backups all your important files before proceeding this tutorial. If something wrong, you can roll back to the original firmware.

DXAME1 Android 4.1.2 Firmware Details:

Date: 2013 May
Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom

Warning !

  • This tutorial is only for Samsung Galaxy S Advance I9070P NFC. Please don’t try this on any other variants of the phone.

  • This is an official firmware by Samsung, not a modified or a custom ROM.

  • Make sure you backup all your data in your phone before proceeding.

s://" target="_blank">$4.29 .Com with Free Private Registration at!s://" target="_blank">50% of Hosting for your Website at!

Step By Step Instructions:

  1. Download Android 4.1.2 I9070PDXAME1 ( File name : File size 458.5 MB )for Galaxy S Advance to your computer and extract the zip file.
  2.  Download ODIN3 v1.85 ( File name : Odin3 v1.85.rar File size: 5.2 MB )which will help you to install Android 4.1.2 on Samsung Galaxy S Advance I9070P NFC.ODIN v1.85
  3. Switch OFF your phone. Now go to Download Mode. How? Press and hold the Volume Down + Home buttons together, and then press the Power button till you see the construction Android robot and a triangle. Press Power again to confirm to enter into Download Mode.
  4. Make sure you have your Galaxy S Advance USB drivers installed on your computer.
  5. Open ODIN on your computer. Connect your phone to your computer while your phone is in the Download Mode.
  6. If your phone is connected successfully, one of the ID:COM boxes will turn yellow with the COM port number. This step might take some time.
  7. Now select the files that you have to flash/install on your phone. These files are to be found from the extracted files in Step 1.
    • Click on ‘PDA’ and select file with ‘CODE’ in its name.
    • Click on ‘Phone’ and select file with ‘MODEM’ in its name. Ignore this step if there is no such file.
    • Click on ‘CSC’ and select file with CSC’ in its name. Ignore this step if there is no such file.
    • Click on ‘PIT’ and select the .pit file. Ignore this step if there is no such file.
  8. In ODIN, check the Auto Reboot and F. Reset Time options. As for the Re-Partition option, check it ONLY if you selected a .PIT file in the above step.
  9. Now click on the Start button in ODIN. Installation process will start and would take a few minutes to complete.
  10. After the installation is completed, your phone will restart. After you see the home screen, unplug your phone from the computer.

Your Galaxy S Advance I9070P now powered by DXAME1 Android 4.1.2 Jelly Bean Official Stock Firmware . You can see that with go to settings > about phone to verify.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial.

Posted in Smartphone. Tagged with , , , , , .

One Response

Leave a Reply