Update AT&T LG Nitro HD P930 to Android 4.2.2 AOKP Build 5 Jelly Bean Custom


LG Nitro HD P930 can now be updated to Android 4.2.2 Jelly Bean with the latest AOKP custom ROM in their latest Build 5 release with tons and tons of features. LG Nitro HD P930 was launched by AT&T and neither of them have announced any official dates on when they would be releasing the new Android updates for this phone. You can install Android 4.2.2 AOKP Build 5 Jelly Bean on AT&T Nitro HD P930 using our tutorial below. This is not an official release by LG, but just a custom ROM which would require a custom recovery like ClockworkMod in order to flash the ROM zip file on your phone.

In this tutorial, we will guide you how to update AT&T LG Nitro HD P930 to Android 4.2.2 AOKP Build 5 Jelly Bean ROM with complete steps. Don’t forget to read all the important tips given below that you have to keep in mind before proceeding to the tutorial on the next page. Make sure you also backup all your data as given since you will have to wipe everything on your phone. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s continue with the tutorial below.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Android 4.2.2 AOKP Build 5 Jelly Bean ROM Details: AOKP Build 5 release of the custom ROM has brought support for Android 4.2.2 Jelly Bean on a number of new Android devices along with some new features as well. Here is a quick list of new features added in the latest Build 5 firmware from Android Open Kang Project (AOKP):

LG Nitro HD USB Drivers You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for LG Nitro HD properly. If not, you can download the latest official drivers from our Android USB Drivers section here:

Backup and Other Important Tips Done with the USB drivers? Perfect. The tutorial is on the next page, but first, please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:

Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data:

If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode. See here: How to Enable USB Debugging — for Gingerbread, Ice Cream Sandwich and Jelly Bean.

2. Make sure your Android device is charged up to 80-85% battery level. This might help you: How to Check Battery Percentage. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

4. Most of the tutorials and how-to guides on Team Android are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE to thank us!

All set and ready? Good. You can now head over to the next page and install Android 4.2.2 AOKP Build 5 Jelly Bean on your LG Nitro HD P930.

Posted in Tutorials. Tagged with , , , , , , , , , , , , .